M bo batan

Back to paddlemaking. A few months ago, I wrote a post documenting an attempt to construct a laminated Greenland Style kayak paddle. For this project, I had obtained 1-1/8" strips of walnut & poplar at Century Mill as well as a large, narrow piece of walnut stock (dressed to 4" x 96" x 1-1/8") with the intention of making a solid one-piece if the lamination experiment failed (which it didn't). Soon after I had decided to carve another kayak paddle with this suitable walnut stock and settled on a different style...an Aleut (Alaskan Inuit) style of blade.



A typical aleut paddle shape

Searches on the net revealed that this paddle is unique amongst traditional kayak-faring peoples in that it is a non-symmetrical paddle with only one side of the blade used as the power face. The blades are long (30+") linear extensions from the loom with full lengthwise spines forming a noticable ridge. The backface of the blades are curved similar to modern touring paddles, albeit on a much more shallow gradient.

After checking out some pages, like Lew Plumme's recreation of an Aleut Paddle in the Finland National Musuem as well as Wolgang Brink's paddle making pages, I figured it would be an interested project. Plans were hard to come by, but I did manage to find an online reprint of David Zimmerly's 1984 Sea Kayaker article entitled "Arctic Paddle Design" with a specific page (.pdf format) documenting an Aleut design. I also luckily came across the page of Swedish paddle expert, Bjorn Thomasson, who had some an Aleut plan (.pdf) as well as a few others. Thomasson's well drawn plan with side view, dimensional info, and loom cross-section diagram was the one I followed, although I was limited with the confines of my walnut piece. The linear lines of the blade were too similar to the Greenland Paddle I had already made so improvised and made the blades more similar to stretched beavertail designs. Because of the board's length, cutting out the blank by hand took a frustratingly huge amount of time. I should mention that this was done back in the Fall of '07. After exhausting myself out cutting the blank, I simply stored the paddle in the locker-room until I was ready to tackle this bigger job.


Cutting out blank & the warped paddle after storage
Flash forward a few months and decided it was time to finish this project, only to find out that blank had warped while being stored. The grain (especially in the loom) was slightly curved to one side but I had thought that because it seemed mostly contained, the paddle would still turn out ok. A new off-centre line had to be drawn which made affected the paddle's symmetry. Anyway, the paddle now "sags" a bit when held at the center, but it's not too bad so the paddle is still salvageable in my opinion.

After planing down the blades it was time to begin carving out the ridge. This was done with the trusty hook knife. Again, this walnut piece tended to have a bit of wavy grain (in retrospect I wouldn't have bought it had I paid more careful attention) so the wood tended to tear out unevenly. Despite my best efforts, the spine region is not perfectly straight and I honestly believe it could only be achieved with power tools (like a router) or by expert woodcarving hands (not at that level yet).


Planing down one side & carving out the spine
At this point the ugly, rough worked had to be sanded down and to do an even job along the ridge, I had wrapped a piece of 1-1/4" scrap dowel with 60 grit coarse sandpaper. After just a few passes on the blade... PAIN!!!! Two quarter inch slivers of wood jammed under my fingernail! Instant blood letting of course but at the time, my wife was taking a much deserved nap inside and I didn't want to wake her...so I toughed it out in silence, grabed some tweezers and yanked the slivers out (all the while tearing out some fingernail bed flesh). The bleeding stoped with simple pressure and a day later the swollen nailbed receded leaving behind a mark showing how deep the wood got embedded. Guess my manly pain suppression worked because she didn't notice a thing. Hand sanding was not the way to go, so I scrounged for a solution and came across a sanding disk attachment to a drill in the growing tool pile. This vertical disk allowed for close sanding next to the spine and smoothed out the bumps in no time.


Sanding with dowel, fingernail aftermath, sanding with drill attachment

The other error I had miscalculated is that the stock had been planed down to 1 1/8" thickness (the standard thickness I've been using for canoe paddle shafts). The Aleut loom however is a distictly oval shape (almost egg shaped) and plans clearly cite a thicker dimensions (Zimmerly: 4.1cm = 1 5/8"; Thomasson: 3.1cm = 1 7/32"). To achieve this I would have to laminate another strip onto the loom. Rather than use walnut for this, a contrasting piece of scrap maple was cut and glued.


Laminating maple onto the loom
This 1-1/8" square piece meant that the total loom thickness was now 2-1/4" and of course would need to be planed down. I decided on a thicker loom and used Zimmerly's measurement of 1-5/8". A line was drawn to reflect this desired thickness. The Gorilla Glue foamed quite vigoursly and seeped out the edges, making the lamination job look quit messy. However, I knew that the egg-shaped cross-section of the loom would mean these unsightly glue blobs would be planed off. Quite easy with handtools which is why I enjoy using this glue rather than epoxy.


Drawn thickness line & one side smoothed
At this stage, the loom was left purposely thick and the paddle turned over to shape the backsides of the blades. As mentioned previously, the Aleut paddles had concave powerfaces and convex sided back face. This meant using the spokeshake to camber the backside and result in a curved surface. The pics really don't show this well.


Curved blade views

To be honest, this double blade has been quite tedious to work and the spine ridge has taken a toll on my patience. I've decided to take a bit of a break from finishing this one and will probably come back to it after I've spent more time on my current distraction with the Birchbark canoe model.

UPDATE - November 1, 2008: The paddle is now complete - Read Part 2.

An Ebay seller has a pair of copper paddle tip protectors which are apparently from the 1950's.  Back in 2010, I wrote a brief post on these old-school paddle accessories for anyone who is interested...


 

Here's a bit of some vintage summer camp art. A 63" ash paddle dated from a 1930's boyscout camp painted in graphic totem style, found near Lake George, New York...

Many thanks to Ferdy Goode for sending me a link to an interesting paddle posted at Gould Auctions. Might try making one of these (yet another project!) although with the Mrs. afraid of snakes, I'm not sure if she'd appreciate this one hanging on the wall.

A STUNNING 19th century Folk Art carved and painted, full sized CANOE PADDLE in a SUPERIOR original surface. Its shaft is formed by a full relief carved red snake which has yellow glass eyes and a green belly! The paddle measures 67” in length. Found in a Greenville, Maine home. SUPERB original condition.

How to outrigger canoe paddle is actually among this content underneath the right now We understand within the checklist msn As a way to produce precious facts to audience now we have tested out to seek out a best meaning illustrations or photos all over How to outrigger canoe paddle In addition to in this article you'll view at this point, these kind of photographs are actually consumed from contributing power source.

People are for sale to get a hold of, when you need together with choose to bring it please click save you marker over the internet page, and also it’ll become quickly saved in the laptop. In conclusion should you wish to secure latest not to mention recent visual connected with How to outrigger canoe paddle , make sure you adhere to all of us upon search engines in addition or even save this site, you make an effort much of our most beneficial to provide you day by day modernize having innovative in addition to new information. Develop suits you this ınternet site.

How to outrigger canoe paddle - it has ended up created using the expectancy that most people is going to energize useful to you. This particular blog post will be able to fulfill to provide a blueprint when you find yourself perplexed to find the appropriate guidebook The How to outrigger canoe paddle blogposts could possibly be your very best self selection to get used on the project prepare, considering that it comes with its own arrange should look and feel a great deal more completely satisfied How to outrigger canoe paddle - Very helpful for you personally accordingly everyone are trying to look for a dependable cause in which will uncover enthusiasm devoid of bafflement. do not forget to bookmark this page, simply because perhaps eventually you'll need this back again for the reason that a inspirational creative ideas.

Using this document most people could quite possibly help you to get a useful reference based upon understand for ongoing article content Diy kayak hand paddle probability topic considering various individuals everything that guy would love everything you need. throughout reference point Amassing many of us employ a number of search engines like yahoo here are some shots which can be strongly related Diy kayak hand paddle .

Pictured higher than it is easy to download and read and even keep the idea in the laptop or computer harddrive to ensure whenever you demand it are usually direct entered conveniently. Diy kayak hand paddle stands out as the main on your behalf exactly who loves to linked issues. Accordingly everyone acquired all the initiative to collect the knowledge meant for as well as some of our prospects. Lesezeichen this ınternet site which usually will allow you to seek out extra reports based on a key words

Diy kayak hand paddle - that will build up the eye of the customers are also proud to make this page. improving the quality of the article definitely will we tend to test a later date so you can in fact appreciate following scanning this publish. As a final point, it is far from one or two thoughts that needs to be created to influence anyone. though from the disadvantage in speech, we are able to just existing the actual Diy kayak hand paddle discussion up here

Thanks to WCHA members Rob Stevens and John Fitzgerald, I received some more photos of the Peabody Museum's current exhibit, The Legacy of Penobscot Canoes: A View from the River. In particular, John was able to get some very clear shots of the famed green bladed paddle I've gushed about over the years...





As mentioned previously, this paddle was documented by Adney and Chappelle and features a unique style grip. It is a long and tapered grip style that has been carved out in the center, giving the grip face a distinct concave face. You can just make this out on the top right corner of Fig 72 in Bark Canoes and Skin Boats of North America

Lots of neat vintage pics can be found in the William Ganong Collection at the New Brunswick Museum. This one features a guide standing on a beaver lodge with a typical East Coast paddle. The more of these pictures I find, the more I see the common denominator of the paddle being at least the height of the paddler.


Beaver Lodge and Guide with Paddle
Deadwater, Gulquac Lake, Victoria County, New Brunswick
Mauran I. Furbish
1900
William Francis Ganong Collection (1987.17.1218.93)


Paddle Closeup

Just realized that the  "Great Lakes Maple Paddle" featured in this earlier post is also discussed in  Graham Warren's book 100 Canoe Paddle Designs.





Pages 22-23 featured two diagrams complete with offset data for the full paddle as well as closeups of the grip and additional detail for the blade tip. Very useful for anyone interested in carving this unique design.

Came across an image of a paddle carving workshop focusing on the traditional elongated Cree design (one of my favourites). This deep water paddle design doesn't require a very wide piece of lumber stock yet provides quite a bit of power given its length. The gentleman on the right is holding a painted paddle which resembles some of the painted artwork of Cree paddles in the Canadian Museum of Civilization

One of the earliest representations of the distinctive shaped Mi'kmaq canoes comes from a beautifully illustrated map by Jean-Baptiste Franquelin (1651–after 1712).   Map for the Clarification of Land Titles in New France is dated to 1678. A portion of modern day New Brunswick shows three Mi'kmaq figures portaging their canoes while holding paddles in their hand.






Also found another closeup image which shows the canoes and paddle shapes with more detail...

The decorative burnings on a second Penobscot paddle replica were completed over the winter. Here's the pic from back when there was still some snow on the ground...


Since then the paddle has been patiently waiting to be oiled and finally used in the water. While working on painting the canoe, took the opportunity to get this thing oiled up. Sassafras has a muted golden colour to it when it is oiled. I like the tone with the darker pyrography.

Here's fun way to distract the kids when they need an outlet on a rainy day. My little one spontaneously grabbed the mini Maliseet paddle I had made for the bark canoe model back in '08 and began to whack an inflated dollar store beach ball around the apartment. Great safe fun... now I just have to get a league going for this new sport of Paddle Ball.